Class: VisibleLayer

Guacamole.Display.VisibleLayer(width, height)

new VisibleLayer(width, height)

Simple container for Guacamole.Layer, allowing layers to be easily repositioned and nested. This allows certain operations to be accelerated through DOM manipulation, rather than raster operations.
Parameters:
Name Type Description
width Number The width of the Layer, in pixels. The canvas element backing this Layer will be given this width.
height Number The height of the Layer, in pixels. The canvas element backing this Layer will be given this height.
Source:

Extends

Members

alpha

The opacity of the layer container, where 255 is fully opaque and 0 is fully transparent.
Source:

autosize :Boolean

Set to true if this Layer should resize itself to accomodate the dimensions of any drawing operation, and false (the default) otherwise. Note that setting this property takes effect immediately, and thus may take effect on operations that were started in the past but have not yet completed. If you wish the setting of this flag to only modify future operations, you will need to make the setting of this flag an operation with sync().
Type:
  • Boolean
Inherited From:
Default Value:
  • false
Source:
Example
// Set autosize to true for all future operations
layer.sync(function() {
    layer.autosize = true;
});

children

Set of all children of this layer, indexed by layer index. This object will have one property per child.
Source:

height :Number

The current height of this layer.
Type:
  • Number
Inherited From:
Source:

matrix :Array.<Number>

The affine transformation applied to this layer container. Each element corresponds to a value from the transformation matrix, with the first three values being the first row, and the last three values being the second row. There are six values total.
Type:
  • Array.<Number>
Source:

parent :Guacamole.Display.VisibleLayer

The parent layer container of this layer, if any.
Type:
Source:

width :Number

The current width of this layer.
Type:
  • Number
Inherited From:
Source:

x :Number

X coordinate of the upper-left corner of this layer container within its parent, in pixels.
Type:
  • Number
Source:

y :Number

Y coordinate of the upper-left corner of this layer container within its parent, in pixels.
Type:
  • Number
Source:

z :Number

Z stacking order of this layer relative to other sibling layers.
Type:
  • Number
Source:

Methods

arc(x, y, radius, startAngle, endAngle, negative)

Add the specified arc to the current path.
Parameters:
Name Type Description
x Number The X coordinate of the center of the circle which will contain the arc.
y Number The Y coordinate of the center of the circle which will contain the arc.
radius Number The radius of the circle.
startAngle Number The starting angle of the arc, in radians.
endAngle Number The ending angle of the arc, in radians.
negative Boolean Whether the arc should be drawn in order of decreasing angle.
Inherited From:
Source:

clip()

Clip all future drawing operations by the current path. The current path is implicitly closed. The current path can continue to be reused for other operations (such as fillColor()) but a new path will be started once a path drawing operation (path() or rect()) is used.
Inherited From:
Source:

close()

Closes the current path by connecting the end point with the start point (if any) with a straight line.
Inherited From:
Source:

copy(srcLayer, srcx, srcy, srcw, srch, x, y)

Copy a rectangle of image data from one Layer to this Layer. This operation will copy exactly the image data that will be drawn once all operations of the source Layer that were pending at the time this function was called are complete. This operation will not alter the size of the source Layer even if its autosize property is set to true.
Parameters:
Name Type Description
srcLayer Guacamole.Layer The Layer to copy image data from.
srcx Number The X coordinate of the upper-left corner of the rectangle within the source Layer's coordinate space to copy data from.
srcy Number The Y coordinate of the upper-left corner of the rectangle within the source Layer's coordinate space to copy data from.
srcw Number The width of the rectangle within the source Layer's coordinate space to copy data from.
srch Number The height of the rectangle within the source Layer's coordinate space to copy data from.
x Number The destination X coordinate.
y Number The destination Y coordinate.
Inherited From:
Source:

curveTo(cp1x, cp1y, cp2x, cp2y, x, y)

Starts a new path at the specified point.
Parameters:
Name Type Description
cp1x Number The X coordinate of the first control point.
cp1y Number The Y coordinate of the first control point.
cp2x Number The X coordinate of the second control point.
cp2y Number The Y coordinate of the second control point.
x Number The X coordinate of the endpoint of the curve.
y Number The Y coordinate of the endpoint of the curve.
Inherited From:
Source:

dispose()

Removes this layer container entirely, such that it is no longer contained within its parent layer, if any.
Source:

distort(a, b, c, d, e, f)

Applies the given affine transform (defined with six values from the transform's matrix).
Parameters:
Name Type Description
a Number The first value in the affine transform's matrix.
b Number The second value in the affine transform's matrix.
c Number The third value in the affine transform's matrix.
d Number The fourth value in the affine transform's matrix.
e Number The fifth value in the affine transform's matrix.
f Number The sixth value in the affine transform's matrix.
Source:

drawImage(x, y, image)

Draws the specified image at the given coordinates. The image specified must already be loaded.
Parameters:
Name Type Description
x Number The destination X coordinate.
y Number The destination Y coordinate.
image Image The image to draw. Note that this is an Image object - not a URL.
Inherited From:
Source:

fillColor(r, g, b, a)

Fills the current path with the specified color. The current path is implicitly closed. The current path can continue to be reused for other operations (such as clip()) but a new path will be started once a path drawing operation (path() or rect()) is used.
Parameters:
Name Type Description
r Number The red component of the color to fill.
g Number The green component of the color to fill.
b Number The blue component of the color to fill.
a Number The alpha component of the color to fill.
Inherited From:
Source:

fillLayer(srcLayer)

Fills the current path with the image within the specified layer. The image data will be tiled infinitely within the stroke. The current path is implicitly closed. The current path can continue to be reused for other operations (such as clip()) but a new path will be started once a path drawing operation (path() or rect()) is used.
Parameters:
Name Type Description
srcLayer Guacamole.Layer The layer to use as a repeating pattern within the fill.
Inherited From:
Source:

getCanvas() → {HTMLCanvasElement}

Returns the canvas element backing this Layer. Note that the dimensions of the canvas may not exactly match those of the Layer, as resizing a canvas while maintaining its state is an expensive operation.
Inherited From:
Source:
Returns:
The canvas element backing this Layer.
Type
HTMLCanvasElement

getElement() → {Element}

Returns the element containing the canvas and any other elements associated with this layer.
Source:
Returns:
The element containing this layer's canvas.
Type
Element

lineTo(x, y)

Add the specified line to the current path.
Parameters:
Name Type Description
x Number The X coordinate of the endpoint of the line to draw.
y Number The Y coordinate of the endpoint of the line to draw.
Inherited From:
Source:

move(parent, x, y, z)

Moves the upper-left corner of this VisibleLayer to the given X and Y coordinate, sets the Z stacking order, and reparents this VisibleLayer to the given VisibleLayer.
Parameters:
Name Type Description
parent Guacamole.Display.VisibleLayer The parent to set.
x Number The X coordinate to move to.
y Number The Y coordinate to move to.
z Number The Z coordinate to move to.
Source:

moveTo(x, y)

Starts a new path at the specified point.
Parameters:
Name Type Description
x Number The X coordinate of the point to draw.
y Number The Y coordinate of the point to draw.
Inherited From:
Source:

pop()

Pop layer state off stack.
Inherited From:
Source:

push()

Push current layer state onto stack.
Inherited From:
Source:

put(srcLayer, srcx, srcy, srcw, srch, x, y)

Put a rectangle of image data from one Layer to this Layer directly without performing any alpha blending. Simply copy the data.
Parameters:
Name Type Description
srcLayer Guacamole.Layer The Layer to copy image data from.
srcx Number The X coordinate of the upper-left corner of the rectangle within the source Layer's coordinate space to copy data from.
srcy Number The Y coordinate of the upper-left corner of the rectangle within the source Layer's coordinate space to copy data from.
srcw Number The width of the rectangle within the source Layer's coordinate space to copy data from.
srch Number The height of the rectangle within the source Layer's coordinate space to copy data from.
x Number The destination X coordinate.
y Number The destination Y coordinate.
Inherited From:
Source:

rect(x, y, w, h)

Add the specified rectangle to the current path.
Parameters:
Name Type Description
x Number The X coordinate of the upper-left corner of the rectangle to draw.
y Number The Y coordinate of the upper-left corner of the rectangle to draw.
w Number The width of the rectangle to draw.
h Number The height of the rectangle to draw.
Inherited From:
Source:

reset()

Reset the layer, clearing the stack, the current path, and any transform matrix.
Inherited From:
Source:

resize(newWidth, newHeight)

Changes the size of this Layer to the given width and height. Resizing is only attempted if the new size provided is actually different from the current size.
Parameters:
Name Type Description
newWidth Number The new width to assign to this Layer.
newHeight Number The new height to assign to this Layer.
Overrides:
Source:

setChannelMask(mask)

Sets the channel mask for future operations on this Layer. The channel mask is a Guacamole-specific compositing operation identifier with a single bit representing each of four channels (in order): source image where destination transparent, source where destination opaque, destination where source transparent, and destination where source opaque.
Parameters:
Name Type Description
mask Number The channel mask for future operations on this Layer.
Inherited From:
Source:

setMiterLimit(limit)

Sets the miter limit for stroke operations using the miter join. This limit is the maximum ratio of the size of the miter join to the stroke width. If this ratio is exceeded, the miter will not be drawn for that joint of the path.
Parameters:
Name Type Description
limit Number The miter limit for stroke operations using the miter join.
Inherited From:
Source:

setTransform(a, b, c, d, e, f)

Sets the given affine transform (defined with six values from the transform's matrix).
Parameters:
Name Type Description
a Number The first value in the affine transform's matrix.
b Number The second value in the affine transform's matrix.
c Number The third value in the affine transform's matrix.
d Number The fourth value in the affine transform's matrix.
e Number The fifth value in the affine transform's matrix.
f Number The sixth value in the affine transform's matrix.
Inherited From:
Source:

shade(a)

Sets the opacity of this layer to the given value, where 255 is fully opaque and 0 is fully transparent.
Parameters:
Name Type Description
a Number The opacity to set.
Source:

strokeColor(cap, join, thickness, r, g, b, a)

Stroke the current path with the specified color. The current path is implicitly closed. The current path can continue to be reused for other operations (such as clip()) but a new path will be started once a path drawing operation (path() or rect()) is used.
Parameters:
Name Type Description
cap String The line cap style. Can be "round", "square", or "butt".
join String The line join style. Can be "round", "bevel", or "miter".
thickness Number The line thickness in pixels.
r Number The red component of the color to fill.
g Number The green component of the color to fill.
b Number The blue component of the color to fill.
a Number The alpha component of the color to fill.
Inherited From:
Source:

strokeLayer(cap, join, thickness, srcLayer)

Stroke the current path with the image within the specified layer. The image data will be tiled infinitely within the stroke. The current path is implicitly closed. The current path can continue to be reused for other operations (such as clip()) but a new path will be started once a path drawing operation (path() or rect()) is used.
Parameters:
Name Type Description
cap String The line cap style. Can be "round", "square", or "butt".
join String The line join style. Can be "round", "bevel", or "miter".
thickness Number The line thickness in pixels.
srcLayer Guacamole.Layer The layer to use as a repeating pattern within the stroke.
Inherited From:
Source:

toCanvas() → {HTMLCanvasElement}

Returns a new canvas element containing the same image as this Layer. Unlike getCanvas(), the canvas element returned is guaranteed to have the exact same dimensions as the Layer.
Inherited From:
Source:
Returns:
A new canvas element containing a copy of the image content this Layer.
Type
HTMLCanvasElement

transfer(srcLayer, srcx, srcy, srcw, srch, x, y, transferFunction)

Transfer a rectangle of image data from one Layer to this Layer using the specified transfer function.
Parameters:
Name Type Description
srcLayer Guacamole.Layer The Layer to copy image data from.
srcx Number The X coordinate of the upper-left corner of the rectangle within the source Layer's coordinate space to copy data from.
srcy Number The Y coordinate of the upper-left corner of the rectangle within the source Layer's coordinate space to copy data from.
srcw Number The width of the rectangle within the source Layer's coordinate space to copy data from.
srch Number The height of the rectangle within the source Layer's coordinate space to copy data from.
x Number The destination X coordinate.
y Number The destination Y coordinate.
transferFunction function The transfer function to use to transfer data from source to destination.
Inherited From:
Source:

transform(a, b, c, d, e, f)

Applies the given affine transform (defined with six values from the transform's matrix).
Parameters:
Name Type Description
a Number The first value in the affine transform's matrix.
b Number The second value in the affine transform's matrix.
c Number The third value in the affine transform's matrix.
d Number The fourth value in the affine transform's matrix.
e Number The fifth value in the affine transform's matrix.
f Number The sixth value in the affine transform's matrix.
Inherited From:
Source:

translate(x, y)

Moves the upper-left corner of this layer to the given X and Y coordinate.
Parameters:
Name Type Description
x Number The X coordinate to move to.
y Number The Y coordinate to move to.
Source: