Installing Guacamole with Docker

Guacamole can be deployed using Docker, removing the need to build guacamole-server from source or configure the web application manually. The Guacamole project provides officially-supported Docker images for both Guacamole and guacd which are kept up-to-date with each release.

A typical Docker deployment of Guacamole will involve three separate containers, linked together at creation time:

guacamole/guacd: Provides the guacd daemon, built from the released guacamole-server source with support for VNC, RDP, SSH, telnet, and Kubernetes.
guacamole/guacamole: Provides the Guacamole web application running within Tomcat 8 with support for WebSocket. The configuration necessary to connect to guacd, MySQL, PostgreSQL, LDAP, etc. will be generated automatically when the image starts based on Docker links or environment variables.
mysql or postgresql: Provides the database that Guacamole will use for authentication and storage of connection configuration data.

This separation is important, as it facilitates upgrades and maintains proper separation of concerns. With the database separate from Guacamole and guacd, those containers can be freely destroyed and recreated at will. The only container which must persist data through upgrades is the database.

Running the guacd Docker image

The guacd Docker image is built from the released guacamole-server source with support for VNC, RDP, SSH, telnet, and Kubernetes. Common pitfalls like installing the required dependencies, installing fonts for SSH, telnet, or Kubernetes, and ensuring the FreeRDP plugins are installed to the correct location are all taken care of. It will simply just work.

Running guacd for use by the Guacamole Docker image

When running the guacd image with the intent of linking to a Guacamole container, no ports need be exposed on the network. Access to these ports will be handled automatically by Docker during linking, and the Guacamole image will properly detect and configure the connection to guacd.

$ docker run --name some-guacd -d guacamole/guacd

When run in this manner, guacd will be listening on its default port 4822, but this port will only be available to Docker containers that have been explicitly linked to some-guacd.

The log level of guacd can be controlled with the GUACD_LOG_LEVEL environment variable. The default value is info, and can be set to any of the valid settings for the guacd log flag (-L).

$ docker run -e GUACD_LOG_LEVEL=debug -d guacamole/guacd

Running guacd for use by services outside Docker

If you are not going to use the Guacamole image, you can still leverage the guacd image for ease of installation and maintenance. By exposing the guacd port, 4822, services external to Docker will be able to access guacd.

Important

Take great care when doing this - guacd is a passive proxy and does not perform any kind of authentication.

If you do not properly isolate guacd from untrusted parts of your network, malicious users may be able to use guacd as a jumping point to other systems.

$ docker run --name some-guacd -d -p 4822:4822 guacamole/guacd

guacd will now be listening on port 4822, and Docker will expose this port on the same server hosting Docker. Other services, such as an instance of Tomcat running outside of Docker, will be able to connect to guacd directly.

The Guacamole Docker image

The Guacamole Docker image is built on top of a standard Tomcat 8 image and takes care of all configuration automatically. The configuration information required for guacd and the various authentication mechanisms are specified with environment variables or Docker links given when the container is created.

Important

If using PostgreSQL or MySQL for authentication, you will need to initialize the database manually. Guacamole will not automatically create its own tables, but SQL scripts are provided to do this.

Once the Guacamole image is running, Guacamole will be accessible at http://HOSTNAME:8080/guacamole/, where HOSTNAME is the hostname or address of the machine hosting Docker.

Configuring Guacamole when using Docker

When running Guacamole using Docker, the traditional approach to configuring Guacamole by editing guacamole.properties is less convenient. When using Docker, you may wish to make use of the enable-environment-properties configuration property, which allows you to specify values for arbitrary Guacamole configuration properties using environment variables. This is covered in Configuring Guacamole.

Connecting Guacamole to guacd

The Guacamole Docker image needs to be able to connect to guacd to establish remote desktop connections, just like any other Guacamole deployment. The connection information needed by Guacamole will be provided either via a Docker link or through environment variables.

If you will be using Docker to provide guacd, and you wish to use a Docker link to connect the Guacamole image to guacd, the connection details are implied by the Docker link:

$ docker run --name some-guacamole \
    --link some-guacd:guacd        \
    ...
    -d -p 8080:8080 guacamole/guacamole

If you are not using Docker to provide guacd, you will need to provide the network connection information yourself using additional environment variables:

GUACD_HOSTNAME: The hostname of the guacd instance to use to establish remote desktop connections. This is required if you are not using Docker to provide guacd.
GUACD_PORT: The port that Guacamole should use when connecting to guacd. This environment variable is optional. If not provided, the standard guacd port of 4822 will be used.

The GUACD_HOSTNAME and, if necessary, GUACD_PORT environment variables can thus be used in place of a Docker link if using a Docker link is impossible or undesirable:

$ docker run --name some-guacamole \
    -e GUACD_HOSTNAME=172.17.42.1  \
    -e GUACD_PORT=4822             \
    ...
    -d -p 8080:8080 guacamole/guacamole

A connection to guacd is not the only thing required for Guacamole to work; some authentication mechanism needs to be configured, as well. MySQL, PostgreSQL, and LDAP are supported for this, and are described in more detail in the sections below. If the required configuration options for at least one authentication mechanism are not provided, the Guacamole image will not be able to start up, and you will see an error.

MySQL authentication

To use Guacamole with the MySQL authentication backend, you will need either a Docker container running the mysql image, or network access to a working installation of MySQL. The connection to MySQL can be specified using either environment variables or a Docker link.

Initializing the MySQL database

If your database is not already initialized with the Guacamole schema, you will need to do so prior to using Guacamole. A convenience script for generating the necessary SQL to do this is included in the Guacamole image.

To generate a SQL script which can be used to initialize a fresh MySQL database as documented in Database authentication:

$ docker run --rm guacamole/guacamole /opt/guacamole/bin/initdb.sh --mysql > initdb.sql

Alternatively, you can use the SQL scripts included with the database authentication.

Once this script is generated, you must:

Create a database for Guacamole within MySQL, such as guacamole_db.
Create a user for Guacamole within MySQL with access to this database, such as guacamole_user.
Run the script on the newly-created database.

The process for doing this via the mysql utility included with MySQL is documented Database authentication.

Connecting Guacamole to MySQL

If your MySQL database is provided by another Docker container, and you wish to use a Docker link to connect the Guacamole image to your database, the connection details are implied by the Docker link itself:

$ docker run --name some-guacamole \
    --link some-guacd:guacd        \
    --link some-mysql:mysql        \
    ...
    -d -p 8080:8080 guacamole/guacamole

If you are not using Docker to provide your MySQL database, you will need to provide the network connection information yourself using additional environment variables:

MYSQL_HOSTNAME: The hostname of the database to use for Guacamole authentication. This is required if you are not using Docker to provide your MySQL database.
MYSQL_PORT: The port that Guacamole should use when connecting to MySQL. This environment variable is optional. If not provided, the standard MySQL port of 3306 will be used.

The MYSQL_HOSTNAME and, if necessary, MYSQL_PORT environment variables can thus be used in place of a Docker link if using a Docker link is impossible or undesirable:

$ docker run --name some-guacamole \
    --link some-guacd:guacd        \
    -e MYSQL_HOSTNAME=172.17.42.1  \
    ...
    -d -p 8080:8080 guacamole/guacamole

Note that a Docker link to guacd (the --link some-guacd:guacd option above) is not required any more than a Docker link is required for MySQL. The connection information for guacd can be specified using environment variables, as described in Connecting Guacamole to guacd.

Required environment variables

Using MySQL for authentication requires additional configuration parameters specified via environment variables. These variables collectively describe how Guacamole will connect to MySQL:

MYSQL_DATABASE: The name of the database to use for Guacamole authentication.
MYSQL_USER: The user that Guacamole will use to connect to MySQL.
MYSQL_PASSWORD: The password that Guacamole will provide when connecting to MySQL as MYSQL_USER.

If any required environment variables are omitted, you will receive an error message in the logs, and the image will stop. You will then need to recreate the container with the proper variables specified.

Optional environment variables

Additional optional environment variables may be used to override Guacamole’s default behavior with respect to concurrent connection use by one or more users. Concurrent use of connections and connection groups can be limited to an overall maximum and/or a per-user maximum:

MYSQL_ABSOLUTE_MAX_CONNECTIONS

The absolute maximum number of concurrent connections to allow at any time, regardless of the Guacamole connection or user involved. If set to “0”, this will be unlimited. Because this limit applies across all Guacamole connections, it cannot be overridden if set.

By default, the absolute total number of concurrent connections is unlimited (“0”).

MYSQL_DEFAULT_MAX_CONNECTIONS

The maximum number of concurrent connections to allow to any one Guacamole connection. If set to “0”, this will be unlimited. This can be overridden on a per-connection basis when editing a connection.

By default, overall concurrent use of connections is unlimited (“0”).

MYSQL_DEFAULT_MAX_GROUP_CONNECTIONS

The maximum number of concurrent connections to allow to any one Guacamole connection group. If set to “0”, this will be unlimited. This can be overridden on a per-group basis when editing a connection group.

By default, overall concurrent use of connection groups is unlimited (“0”).

MYSQL_DEFAULT_MAX_CONNECTIONS_PER_USER

The maximum number of concurrent connections to allow a single user to maintain to any one Guacamole connection. If set to “0”, this will be unlimited. This can be overridden on a per-connection basis when editing a connection.

By default, per-user concurrent use of connections is unlimited (“0”).

MYSQL_DEFAULT_MAX_GROUP_CONNECTIONS_PER_USER

The maximum number of concurrent connections to allow a single user to maintain to any one Guacamole connection group. If set to “0”, this will be unlimited. This can be overridden on a per-group basis when editing a connection group.

By default, per-user concurrent use of connection groups is limited to one (“1”), to prevent a balancing connection group from being completely exhausted by one user alone.

MYSQL_AUTO_CREATE_ACCOUNTS

Whether or not accounts that do not exist in the MySQL database will be automatically created when successfully authenticated through other modules. If set to “true” accounts will be automatically created. Otherwise, and by default, accounts will not be automatically created and will need to be manually created in order for permissions within the MySQL database extension to be assigned to users authenticated with other modules.

PostgreSQL authentication

To use Guacamole with the PostgreSQL authentication backend, you will need either a Docker container running the postgres image, or network access to a working installation of PostgreSQL. The connection to PostgreSQL can be specified using either environment variables or a Docker link.

Initializing the PostgreSQL database

If your database is not already initialized with the Guacamole schema, you will need to do so prior to using Guacamole. A convenience script for generating the necessary SQL to do this is included in the Guacamole image.

To generate a SQL script which can be used to initialize a fresh PostgreSQL database as documented in Database authentication:

$ docker run --rm guacamole/guacamole /opt/guacamole/bin/initdb.sh --postgres > initdb.sql

Alternatively, you can use the SQL scripts included with the database authentication.

Once this script is generated, you must:

Create a database for Guacamole within PostgreSQL, such as guacamole_db.
Run the script on the newly-created database.
Create a user for Guacamole within PostgreSQL with access to the tables and sequences of this database, such as guacamole_user.

The process for doing this via the psql and createdb utilities included with PostgreSQL is documented in Database authentication.

Connecting Guacamole to PostgreSQL

If your PostgreSQL database is provided by another Docker container, and you wish to use a Docker link to connect the Guacamole image to your database, the connection details are implied by the Docker link itself:

$ docker run --name some-guacamole \
    --link some-guacd:guacd        \
    --link some-postgres:postgres  \
    ...
    -d -p 8080:8080 guacamole/guacamole

If you are not using Docker to provide your PostgreSQL database, you will need to provide the network connection information yourself using additional environment variables:

POSTGRES_HOSTNAME: The hostname of the database to use for Guacamole authentication. This is required if you are not using Docker to provide your PostgreSQL database.
POSTGRES_PORT: The port that Guacamole should use when connecting to PostgreSQL. This environment variable is optional. If not provided, the standard PostgreSQL port of 5432 will be used.

The POSTGRES_HOSTNAME and, if necessary, POSTGRES_PORT environment variables can thus be used in place of a Docker link if using a Docker link is impossible or undesirable:

$ docker run --name some-guacamole   \
    --link some-guacd:guacd          \
    -e POSTGRES_HOSTNAME=172.17.42.1 \
    ...
    -d -p 8080:8080 guacamole/guacamole

Note that a Docker link to guacd (the --link some-guacd:guacd option above) is not required any more than a Docker link is required for PostgreSQL. The connection information for guacd can be specified using environment variables, as described in Connecting Guacamole to guacd.

Required environment variables

Using PostgreSQL for authentication requires additional configuration parameters specified via environment variables. These variables collectively describe how Guacamole will connect to PostgreSQL:

POSTGRES_DATABASE: The name of the database to use for Guacamole authentication.
POSTGRES_USER: The user that Guacamole will use to connect to PostgreSQL.
POSTGRES_PASSWORD: The password that Guacamole will provide when connecting to PostgreSQL as POSTGRES_USER.

If any required environment variables are omitted, you will receive an error message in the logs, and the image will stop. You will then need to recreate the container with the proper variables specified.

Optional environment variables

Additional optional environment variables may be used to override Guacamole’s default behavior with respect to concurrent connection use by one or more users. Concurrent use of connections and connection groups can be limited to an overall maximum and/or a per-user maximum:

POSTGRES_ABSOLUTE_MAX_CONNECTIONS

The absolute maximum number of concurrent connections to allow at any time, regardless of the Guacamole connection or user involved. If set to “0”, this will be unlimited. Because this limit applies across all Guacamole connections, it cannot be overridden if set.

By default, the absolute total number of concurrent connections is unlimited (“0”).

POSTGRES_DEFAULT_MAX_CONNECTIONS

The maximum number of concurrent connections to allow to any one Guacamole connection. If set to “0”, this will be unlimited. This can be overridden on a per-connection basis when editing a connection.

By default, overall concurrent use of connections is unlimited (“0”).

POSTGRES_DEFAULT_MAX_GROUP_CONNECTIONS

The maximum number of concurrent connections to allow to any one Guacamole connection group. If set to “0”, this will be unlimited. This can be overridden on a per-group basis when editing a connection group.

By default, overall concurrent use of connection groups is unlimited (“0”).

POSTGRES_DEFAULT_MAX_CONNECTIONS_PER_USER

The maximum number of concurrent connections to allow a single user to maintain to any one Guacamole connection. If set to “0”, this will be unlimited. This can be overridden on a per-connection basis when editing a connection.

By default, per-user concurrent use of connections is unlimited (“0”).

POSTGRES_DEFAULT_MAX_GROUP_CONNECTIONS_PER_USER

The maximum number of concurrent connections to allow a single user to maintain to any one Guacamole connection group. If set to “0”, this will be unlimited. This can be overridden on a per-group basis when editing a connection group.

By default, per-user concurrent use of connection groups is limited to one (“1”), to prevent a balancing connection group from being completely exhausted by one user alone.

POSTGRES_AUTO_CREATE_ACCOUNTS

Whether or not accounts that do not exist in the PostgreSQL database will be automatically created when successfully authenticated through other modules. If set to “true”, accounts will be automatically created. Otherwise, and by default, accounts will not be automatically created and will need to be manually created in order for permissions within the PostgreSQL database extension to be assigned to users authenticated with other modules.

Optional environment variables may also be used to override Guacamole’s default behavior with respect to timeouts at the database and network level:

POSTGRES_DEFAULT_STATEMENT_TIMEOUT: The number of seconds the driver will wait for a response from the database, before aborting the query. A value of 0 (the default) means the timeout is disabled.
POSTGRES_SOCKET_TIMEOUT: The number of seconds to wait for socket read operations. If reading from the server takes longer than this value, the connection will be closed. This can be used to handle network problems such as a dropped connection to the database. Similar to POSTGRES_DEFAULT_STATEMENT_TIMEOUT, it will also abort queries that take too long. A value of 0 (the default) means the timeout is disabled.

LDAP authentication

To use Guacamole with the LDAP authentication backend, you will need network access to an LDAP directory. Unlike MySQL and PostgreSQL, the Guacamole Docker image does not support Docker links for LDAP; the connection information must be specified using environment variables:

LDAP_HOSTNAME: The hostname or IP address of your LDAP server.
LDAP_PORT: The port your LDAP server listens on. By default, this will be 389 for unencrypted LDAP or LDAP using STARTTLS, and 636 for LDAP over SSL (LDAPS).
LDAP_ENCRYPTION_METHOD: The encryption mechanism that Guacamole should use when communicating with your LDAP server. Legal values are “none” for unencrypted LDAP, “ssl” for LDAP over SSL/TLS (commonly known as LDAPS), or “starttls” for STARTTLS. If omitted, encryption will not be used.

Only the LDAP_HOSTNAME variable is required, but you may also need to specify LDAP_PORT or LDAP_ENCRYPTION_METHOD if your LDAP directory uses encryption or listens on a non-standard port:

$ docker run --name some-guacamole \
    --link some-guacd:guacd        \
    -e LDAP_HOSTNAME=172.17.42.1   \
    ...
    -d -p 8080:8080 guacamole/guacamole

Note that a Docker link to guacd (the --link some-guacd:guacd option above) is not required. Similar to LDAP, the connection information for guacd can be specified using environment variables, as described in Connecting Guacamole to guacd.

Required environment variables

Using LDAP for authentication requires additional configuration parameters specified via environment variables. These variables collectively describe how Guacamole will query your LDAP directory:

LDAP_USER_BASE_DN: The base of the DN for all Guacamole users. All Guacamole users that will be authenticating against LDAP must be descendents of this base DN.

As with the other authentication mechanisms, if any required environment variables are omitted (including those required for connecting to the LDAP directory over the network), you will receive an error message in the logs, and the image will stop. You will then need to recreate the container with the proper variables specified.

Optional environment variables

Additional optional environment variables may be used to configure the details of your LDAP directory hierarchy, or to enable more flexible searching for user accounts:

LDAP_GROUP_BASE_DN: The base of the DN for all groups that may be referenced within Guacamole configurations using the standard seeAlso attribute. All groups which will be used to control access to Guacamole configurations must be descendents of this base DN. If this variable is omitted, the seeAlso attribute will have no effect on Guacamole configurations.
LDAP_GROUP_SEARCH_FILTER: The search filter used to query the LDAP tree for groups that may be used by other extensions to define permissions. If this property is omitted the default of (objectClass=*) will be used.
LDAP_GROUP_NAME_ATTRIBUTE: The attribute or attributes which define the unique name of user groups in the LDAP directory. Usually, and by default, this will simplify be “cn”. If your LDAP directory contains groups whose names are dictated by different attributes, multiple attributes can be specified here, separated by commas.
LDAP_MEMBER_ATTRIBUTE: The attribute which contains the members within all group objects in the LDAP directory. Usually, and by default, this will simply be “member”. If your LDAP directory contains groups whose members are dictated by a different attribute it can be specified, here.
LDAP_MEMBER_ATTRIBUTE_TYPE: Specify whether the attribute defined in LDAP_MEMBER_ATTRIBUTE identifies a group member by DN or usercode (user id). Valid values are “dn” (the default, if not specified) or “uid”.
LDAP_SEARCH_BIND_DN: The DN (Distinguished Name) of the user to bind as when authenticating users that are attempting to log in. If specified, Guacamole will query the LDAP directory to determine the DN of each user that logs in. If omitted, each user’s DN will be derived directly using the base DN specified with LDAP_USER_BASE_DN.
LDAP_SEARCH_BIND_PASSWORD: The password to provide to the LDAP server when binding as LDAP_SEARCH_BIND_DN to authenticate other users. This variable is only used if LDAP_SEARCH_BIND_DN is specified. If omitted, but LDAP_SEARCH_BIND_DN is specified, Guacamole will attempt to bind with the LDAP server without a password.
LDAP_USERNAME_ATTRIBUTE: The attribute or attributes which contain the username within all Guacamole user objects in the LDAP directory. Usually, and by default, this will simply be “uid”. If your LDAP directory contains users whose usernames are dictated by different attributes, multiple attributes can be specified here, separated by commas, but beware: doing so requires that a search DN be provided with LDAP_SEARCH_BIND_DN.
LDAP_USER_ATTRIBUTES: The attribute or attributes to retrieve from the LDAP directory for users when they log in, with multiple attributes separated by commas. If specified, the attributes listed are retrieved from each authenticated users and dynamically applied to the parameters of that user’s connections as parameter tokens with the prefix LDAP_.
LDAP_CONFIG_BASE_DN: The base of the DN for all Guacamole configurations. If omitted, the configurations of Guacamole connections will simply not be queried from the LDAP directory, and you will need to store them elsewhere, such as within a MySQL or PostgreSQL database.
LDAP_DEREFERENCE_ALIASES: Controls whether or not the LDAP connection follows (dereferences) aliases as it searches the tree. Possible values for this property are “never” (the default), so that aliases will never be followed, “searching”, to dereference during the search operations after the base object is located, “finding”, to dereference in order to locate the search base but not during the actual search, and “always”, to always dereference aliases.
LDAP_FOLLOW_REFERRALS: This option controls whether or not the LDAP module follows referrals when processing search results. Referrals can be pointers to another part of the current LDAP tree, or to a completely different tree altogether, hosted on a different server and/or port. Valid options are “false” (the default), which means that referrals will be ignored, or “true”, where the client will attempt to follow the referrals in order to continue the search. The referral will be followed with the same credentials used to search the initial tree.
LDAP_MAX_REFERRAL_HOPS: When LDAP referrals are enabled, this option controls how many hops the LDAP client will follow before refusing to continue. The default is 5.
LDAP_MAX_SEARCH_RESULTS: The maximum number of search results that can be returned by a single LDAP query. LDAP queries which exceed this number of results may fail. By default the maximum number of results for a single LDAP query is 1000.
LDAP_OPERATION_TIMEOUT: The timeout, in seconds, of any single LDAP operation, after which the operation will be aborted. The default is 30 seconds.

As documented in LDAP authentication, Guacamole does support combining LDAP with a MySQL or PostgreSQL database, and this can be configured with the Guacamole Docker image, as well. Each of these authentication mechanisms is independently configurable using their respective environment variables, and by providing the required environment variables for multiple systems, Guacamole will automatically be configured to use each when the Docker image starts.

Header Authentication

The header authentication extension can be used to authenticate Guacamole through a trusted third-party server, where the authenticated user’s username is passed back to Guacamole via a specific HTTP header. The following are valid Docker variables for enabling and configuring header authentication:

HEADER_ENABLED: Enables authentication via the header extension, which causes the extension to be loaded when Guacamole starts. By default this is false and the header extension will not be loaded.
HTTP_AUTH_HEADER: Optional environment variable that, if set, configures the name of the HTTP header that will be used used to authenticate the user to Guacamole. If this is not specified the default value of REMOTE_USER will be used.

SAML Authentication

SAML authentication can be configured to allow the Guacamole Client instance running in a Docker container to authentication with a SAML Identity Provider (IdP). The IdP verifies the user authentication and then provides a response back to Guacamole with the name of the user and any other configured attributes contained in the SAML assertion. More details on SAML authentication with Guacamole can be found on the SAML Authentication page.

Required environment variables

Configuration of SAML authentication requires that either a metadata file or a few other basic configuration parameters be provided to the container:

SAML_IDP_METADATA_URL: The URI of a file that provides information about the SAML IdP that will be used to authenticate users. This can either be a local file on the filesystem, or it can be the URL of a file on a remote server. Note that if the file is located on a local filesystem it will have to be made available to the Docker container by either copying the file in or using a file located on a volume that is shared with the container. Metadata files for SAML authentication are generally obtained from the IdP.
SAML_IDP_URL: If a metadata file is not provided, or does not contain the URL of the Identity Provider, then this variable must be present in order to tell Guacamole the location of the IdP, which is where users will be redirected for authentication.
SAML_ENTITY_ID: The SAML Entity Identifier of the Guacamole Client instance that will be provided to the SAML IdP. This is generally the URL of the Guacamole server. If the metadata URL is not provided, or the metadata file does not contain an entity ID, this variable must be provided.
SAML_CALLBACK_URL: The URL of the Guacamole instance that will be given to the SAML IdP, which will be used by the IdP to redirect the user back to the Guacamole instance after the user has been validated. If the metadata file is not provided, or does not contain a callback URL for the Guacamole instance, this variable must be provided.

Optional environment variables

Other environment variables can be provided to adjust the behavior of the SAML authentication extension.

SAML_STRICT: A boolean value that configures whether or not the Guacamole SAML client will perform strict security checks on servers and certificates. This is normally enabled and should never be disabled in a production environment.
SAML_COMPRESS_REQUEST: A boolean value that configures whether or not the Guacamole SAML client will enable compression on requests sent to the IdP. This defaults to enabled (true).
SAML_COMPRESS_RESPONSE: A boolean value that configures whether or not the Guacamole SAML client will request that responses from the IdP be compressed. This defaults to enabled (true).
SAML_GROUP_ATTRIBUTE: The name of the attribute within the SAML assertion that contains the group membership of the user who is being authenticated, if any. This property is optional and defaults to “groups”.
SAML_DEBUG: Whether or not the Guacamole SAML client should provide verbose logging that may be helpful in debugging problems with SAML authentication. This is optional and defaults to false - debugging will not be enabled.

Running Guacamole behind a proxy

To run Guacamole behind a reverse proxy, Tomcat’s RemoteIpValve must be configured as described in Setting up the Remote IP Valve to ensure that the user’s IP address can be correctly determined and logged. The Guacamole Docker image provides environment variables for configuring this.

Required environment variables

The following environment variable must be set in order to configure Tomcat’s RemoteIpValve:

REMOTE_IP_VALVE_ENABLED: Set to true to enable Tomcat’s RemoteIpValve. If this is not set, all other variables related to RemoteIpValve will be ignored.

Optional environment variables

Additional environment variables are available to fine tune the configuration of RemoteIpValve. It is not typically necessary to set these variables. The default values are correct for most deployments.

PROXY_ALLOWED_IPS_REGEX

A regular expression matching only the IP addresses that should be trusted to send proxy headers, corresponding to the internalProxies attribute of RemoteIpValve. Proxy headers from other addresses will be ignored. The regular expression must conform to the format accepted by Java’s Pattern class, which is largely compatible with Perl.

If omitted, Tomcat’s default which matches private IPv4 and IPv6 addresses will be used.

PROXY_BY_HEADER

The HTTP header sent by the proxy that contains the list of proxies that have processed the request. This corresponds to the proxiesHeader attribute of RemoteIpValve. By default, this will be X-Forwarded-By.

PROXY_IP_HEADER

The HTTP header sent by the proxy that contains the user’s browser’s IP address. This corresponds to the remoteIpHeader attribute of RemoteIpValve. By default, this will be X-Forwarded-For.

PROXY_PROTOCOL_HEADER

The HTTP header sent by the proxy that contains the protocol used by the user’s browser to connect to the proxy. This corresponds to the protocolHeader attribute of RemoteIpValve. By default, this will be X-Forwarded-Proto.

Custom extensions and `GUACAMOLE_HOME`

If you have your own or third-party extensions for Guacamole which are not supported by the Guacamole Docker image, but are compatible with the version of Guacamole within the image, you can still use them by providing a custom base configuration using the GUACAMOLE_HOME environment variable:

GUACAMOLE_HOME: The absolute path to the directory within the Docker container to use as a template for the image’s automatically-generated GUACAMOLE_HOME. Any configuration generated by the Guacamole Docker image based on other environment variables will be applied to an independent copy of the contents of this directory.

You will still need to follow the steps required to create the contents of GUACAMOLE_HOME specific to your extension (placing the extension itself within GUACAMOLE_HOME/extensions/, adding any properties to guacamole.properties, etc.), but the rest of Guacamole’s configuration will be handled automatically, overlaid on top of a copy of the GUACAMOLE_HOME you provide.

Because the Docker image’s GUACAMOLE_HOME environment variable must point to a directory within the container, you will need to expose your custom GUACAMOLE_HOME to the container using the -v option of docker run. The container directory chosen can then be referenced in the GUACAMOLE_HOME environment variable, and the image will handle the rest automatically:

$ docker run --name some-guacamole    \
    ...
    -v /local/path:/some-directory   \
    -e GUACAMOLE_HOME=/some-directory \
    -d -p 8080:8080 guacamole/guacamole

Extension priority and load order

Guacamole extensions are loaded and evaluated in a specific, deterministic order. This order can be important when multiple authentication extensions are installed, as it dictates which extensions will be given the first chance to accept or reject a user’s credentials. By default, this order is dictated by the sort order of their corresponding filenames. If necessary, extension priority can be overridden with the EXTENSION_PRIORITY environment variable.

EXTENSION_PRIORITY

A comma-separated list of the namespaces of all extensions that should be loaded in a specific order. The special value * can be used in lieu of a namespace to represent all extensions that are not listed. All extensions explicitly listed will be sorted in the order given, while all extensions not explicitly listed will be sorted by their filenames.

For example, to ensure support for SAML is loaded first:

-e EXTENSION_PRIORITY="saml"

Or to ensure support for SAML is loaded last:

-e EXTENSION_PRIORITY="*, saml"

If unsure which namespaces apply or the order that your extensions are loaded, check the Guacamole logs. The namespaces and load order of all installed extensions are logged by Guacamole during startup:

...
32:06.467 [main] INFO  o.a.g.extension.ExtensionModule - Multiple extensions are installed and will be loaded in order of decreasing priority:
32:06.468 [main] INFO  o.a.g.extension.ExtensionModule -  - [postgresql] "PostgreSQL Authentication" (/etc/guacamole/extensions/guacamole-auth-jdbc-postgresql-1.5.0.jar)
32:06.468 [main] INFO  o.a.g.extension.ExtensionModule -  - [ldap] "LDAP Authentication" (/etc/guacamole/extensions/guacamole-auth-ldap-1.5.0.jar)
32:06.468 [main] INFO  o.a.g.extension.ExtensionModule -  - [openid] "OpenID Authentication Extension" (/etc/guacamole/extensions/guacamole-auth-sso-openid-1.5.0.jar)
32:06.468 [main] INFO  o.a.g.extension.ExtensionModule -  - [saml] "SAML Authentication Extension" (/etc/guacamole/extensions/guacamole-auth-sso-saml-1.5.0.jar)
32:06.468 [main] INFO  o.a.g.extension.ExtensionModule - To change this order, set the "extension-priority" property or rename the extension files. The default priority of extensions is dictated by the sort order of their filenames.
...

Verifying the Guacamole install

Once the Guacamole image is running, Guacamole should be accessible at http://HOSTNAME:8080/guacamole/, where HOSTNAME is the hostname or address of the machine hosting Docker, and you should see a login screen. If using MySQL or PostgreSQL, the database initialization scripts will have created a default administrative user called “guacadmin” with the password “guacadmin”. You should log in and change your password immediately. If using LDAP, you should be able to log in as any valid user within your LDAP directory.

If you cannot access Guacamole, or you do not see a login screen, check Docker’s logs using the docker logs command to determine if something is wrong. Configuration parameters may have been given incorrectly, or the database may be improperly initialized:

$ docker logs some-guacamole

Installing Guacamole with Docker

Running the guacd Docker image

Running guacd for use by the Guacamole Docker image

Running guacd for use by services outside Docker

The Guacamole Docker image

Configuring Guacamole when using Docker

Connecting Guacamole to guacd

MySQL authentication

Initializing the MySQL database

Connecting Guacamole to MySQL

Required environment variables

Optional environment variables

PostgreSQL authentication

Initializing the PostgreSQL database

Connecting Guacamole to PostgreSQL

Required environment variables

Optional environment variables

LDAP authentication

Required environment variables

Optional environment variables

Header Authentication

SAML Authentication

Required environment variables

Optional environment variables

Running Guacamole behind a proxy

Required environment variables

Optional environment variables

Custom extensions and GUACAMOLE_HOME

Extension priority and load order

Verifying the Guacamole install

Custom extensions and `GUACAMOLE_HOME`